Cold Spray for Industrial Applications

Reeti Singh, Jan Kondas, Leonhard Holzgassner

Impact Innovations GmbH, Germany

Adhesion of cold sprayed soft coatings: effect of substrate roughness and hardness

Frank Gaertner¹, Alessia Bruera², Pietro Puddu², Stephan Theimer¹, Maria Villa-Vidaller¹, Alexander List¹, Giovanni Bolelli², Thomas Klassen¹, Luca Lusvarghi²

¹Helmut Schmidt University, Hamburg, Germany; ²University of Modena and Reggio Emilia, Modena, Italy

Deposition of polymer coatings by low-pressure cold spray

Lukas Derad, Andreas Killinger

IFKB Universität Stuttgart, Germany

Investigating Long-Term Performance of Low-Pressure Cold-Sprayed TiO2 Photocatalytic Coatings

Wioletta Seremak¹, Marek Jasiorski¹, Agnieszka Baszczuk¹, Marcin Winnicki²

¹Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, Wroclaw, Poland; ²Department of Metal Forming, Welding and Metrology, Wroclaw University of Science and Technology, Wroclaw, Poland

Alloyed Cr3C2-NiCr and TiCN-based coatings as an alternative for WC-CoCr coatings

Lutz-Michael Berger¹, Šarka Houdková², Marek Vostřák², Susan Conze¹, Tomáš Taranda²

¹Fraunhofer IKTS, Germany; ²Research and Testing Institute Plzen, Czech Republic

Carbide materials for exceptional applications in wear protection

Alexander Barth¹, Wellington Goes², Oliver Lanz¹

¹Höganäs Germany GmbH, Germany; ²Höganäs Sweden AB, Sweden

Comparative studies of aerosol cold sprayed titanium based coatings modified with Ti-TiC satellite powder

Hanna Myalska-Głowacka¹, Grzegorz Cios², Grzegorz Kubicki³, Marcin Godzierz⁴, Klaudia Kurtyka⁴, Paweł Sokołowski⁵, Grzegorz Moskal¹

¹Silesian University of Technology, Faculty of Materials Engineering, Poland; ²AGH University of Science and Technology, Academic Centre for Materials and Nanotechnology, Poland; ³Łukasiewicz Research Network – Poznań Institute of Technology, Poland; ⁴Polish Academy of Sciences, Centre of Polymer and Carbon Materials, Poland; ⁵Wroclaw University of Science and Technology, Faculty of Mechanical Engineering, Poland

Effect of dispersed nano-Pr6O11 on WC-CoCr thermal spraying coating and modification mechanism

Jin Liu, Zhiqiang Yi, Lei Lu, Hua Li, Ye Tian, Yakun Deng, Xin Chen

Institute of Applied Physics, Jiangxi Academy of Sciences, China, People's Republic of

Permeability and Percolation Response of Thermal Spray Coatings

Sanjay Sampath, John Saputo

Stony Brook University, Stony Brook, NY 11794, USA

Detailed microstructural characterization of WC-Co coatings produced by CGS and HVAF

Soeren Höhn¹, Conze Susan¹, Wonneberger Robert², Drehmann Rico², Cinca Nuria³, Dosta Sergi⁴, Koivuluoto Heli⁵, Lampke Thomas², Unidsz Andreas²

¹Fraunhofer IKTS, Germany; ²Chemnitz University of Technology, Institute of Materials Science and Engineering; ³Hyperion Materials & Technologies; ⁴Universitat de Barcelona, Departament de Ciència dels Materials i Química Física; ⁵Tampere University, Materials Science and Environmental Engineering, Faculty of Engineering and Natural Sciences,

NOVEL BENDING BASED METHODS FOR HGH THROUGHPUT INTERFACE FRACTURE ENERGY MEASUREMENTS OF METAL/CERAMIC INTERFACE

Saim Abbas¹, Sudhanshu Mallick¹, Sanjay Sampath², Balila Nagamani Jaya¹

¹Indian Institute of Technology Bombay, India; ²Centre for Thermal Spray Research, Stony Brook University, Stony Brook, NY 11794, USA

Physical Methods of Film and Coatings Deposition (provisional title)

Lech Pawlowski

The University of Limoges, France

Charting unexploited territories with axial-feed plasma spraying

Shrikant Joshi

University West, Sweden

Erosion Performance and CMAS Degradation of Non-Flammable Suspension Plasma Sprayed YSZ Coatings

Siddharth Lokachari¹, Tanvir Hussain², Andy Norton³

¹university of nottingham, United Kingdom; ²university of nottingham, United Kingdom; ³Rolls-Royce plc., Derby, United Kingdom

Advanced synchrotron micro-X-ray diffraction and X-ray fluorescence for localized phase and elemental analysis in suspension plasma sprayed environmental barrier coatings

Chinmayee Nayak¹, Arman Hasani¹, Sneha Goel², Antti Salimen¹, Malgorzata Grazyna Makowska³, Alex Lynam⁴, Acacio Rincon Romero⁴, Ebenezer Owusu⁴, Tanvir Hussain⁴, Ashish Ganvir¹

¹University of Turku, Finland; ²VTT Technical Research Centre of Finland: Espoo, Finland; ³Paul Scherrer Institut: Villigen, Swizerland; ⁴University of Nottingham, Nottingham, NG7 2RD, United Kingdom

Influence of the particle size on photocatalytic activity of the TiO2 coatings manufactured by suspension plasma spraying

Karolina Płatek, Leszek Łatka, Agnieszka Baszczuk, Marek Jasiorski

Wrocław University of Science and Technology, Poland

Formation of nanoceramic oxide APS coatings on glass with photocatalytic properties

Alicja Duda^1,3, Bartosz Kopyciński^2,3, Łukasz Hawełek¹, Krzysztof Pęcak^1,3, Piotr Tomczyk¹, Grzegorz Muzia¹, Adriana Wrona¹

¹Łukasiewicz Research Network - Institute of Non-Ferrous Metals, 44-100 Gliwice, Poland; ²Łukasiewicz Research Network – Institute for Engineering of Polymer Materials and Dyes, 87-100 Toruń, Polska; ³Doctoral School, Silesian University of Technology, 44-100, Gliwice, Poland

Modelling of cold spray using IN718 with a focus on spray spot optimization

Johannes-Christian Schmitt¹, Jochen Fiebig¹, Robert Mücke¹, Olivier Guillon^1,2, Robert Vaßen^1,3

¹Institute of Energy and Climate Research (IEK-1), Forschungszentrum Jülich GmbH, Jülich, Germany; ²JARA Energy, Jülich Aachen Research Alliance, Jülich, Germany; ³Institut für Werkstoffe, Ruhr University Bochum, Bochum, Germany

Protective Thermal Spray Coatings for TES applications.

Lorena Betancor Cazorla, Camila Barreneche, Adela Svobodova-Sedlackova, Genís Clavé, Sergi Dosta

Universitat de Barcelona, Spain

Degradation processes characterization in dual-phase Ln2Zr2O7+8YSZ TBC systems under oxidation and hot corrosion conditions

Grzegorz Moskal, Hanna Myalska-Głowacka, Amjad Iqbal, Jahangir Khan

Silesian University of Technology, Poland

TiO2 Powder Modification for Low-Pressure Cold Spraying of the Photocatalytic Coatings: solvent influence in sol-gel process

Wioletta Seremak¹, Marek Jasiorski¹, Agnieszka Baszczuk¹, Marcin Winnicki²

¹Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, Wroclaw, Poland; ²Department of Metal Forming, Welding and Metrology, Wroclaw University of Science and Technology, Wroclaw, Poland

Application of image analysis to characterization of TBC systems microstructure

Stanisław Roskosz, Moskal Grzegorz

Silesian University of Technology, Poland

Coatings on oxide fiber-reinforced ceramic composites (OCMC) for high temperature applications

Ebru Gyoktepeliler Akin, Andreas Killinger

University of Stuttgart, Germany

Data Acquisition During Thermal Coating And Event-Oriented Evaluation

Stephan Zimmermann, Christian Rupprecht, Gerd Paczkowski

CGS Plasmatechnik UG (haftungsbeschränkt), Germany

Deposition of titanium on stainless steel expanded metals using cold gas spraying as an alternative for titanium fleeces in PEM electrolyzers

Tim Sievert¹, Sarah Zerressen², Martin Bram¹, Andreas Glüsen², Olivier Guillon¹, Robert Vaßen¹

¹Forschungszentrum Jülich, Institute of Energy and Climate Research, Materials Synthesis and Processing (IEK-1); ²Forschungszentrum Jülich, Institute of Energy and Climate Research, Electrochemical Process Engineering (IEK-14)

Development of repair methods for single crystal components using thermal spray processes

Maike Letang¹, Aleksander Kostka², Nicolas Karpstein³, Inmaculada López-Galilea², Erdmann Spiecker³, Olivier Guillon^1,4, Robert Vaßen^1,2

¹Institute of Energy and Climate Research (IEK-1), Forschungszentrum Jülich GmbH, Germany; ²Institute for Materials, Ruhr University Bochum, Germany; ³Department of Materials Science and Engineering, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; ⁴JARA Energy, Jülich Aachen Research Alliance, Germany

Higher manganese silicide powder sintering using tungsten inert gas torch

Nadjet Bouhelal^1,2, Yamina Mebdoua Lahmar¹, Mohammed Lamine Benamar²

¹Center for Development of Advanced Technologies, Algeria; ²Saad Dahleb University, Blida 1 Algeria

Influence of bond coat roughness and substrate composition on thermal shock resistance of APS NiCrAlY/Porous Y-PSZ TBC systems on Cr2O3-forming superalloy

Giulia Pedrizzetti¹, Rita Bottacchiari¹, Lidia Baiamonte¹, Elvira Giubbolini², Erica Scrinzi², Francesco Marra¹, Giovanni Pulci¹

¹Department of Chemical Engineering, Materials, Environment, Sapienza University of Rome, INSTM Ref-erence Laboratory for Engineering of Surface Treatments, Via Eudossiana 18, 00184 Rome, Italy; ²Nuovo Pignone Tecnologie Srl, Baker Hughes, Via Felice Matteucci 2, 50127 Florence, Italy

Influence of high-temperature exposure on the architecture of pores and cracks in TBC systems

Stanisław Roskosz, Moskal Grzegorz

Silesian University of Technology, Poland

Low Pressure Plasma Sprayed Tungsten Coatings on First Wall Components for Future Fusion Devices

Gunnar Schmidtmann^1,2, Andrey Litnovsky¹, Jan Willem Coenen¹, Robert Vaßen², Sebastijan Brezinsek¹, Christian Linsmeier¹, Olivier Guillon², Georg Mauer²

¹Forschungszentrum Jülich GmbH, Institut für Energie und Klimaforschung - Plasmaphysik (IEK-4), 52425 Jülich, Germany; ²Forschungszentrum Jülich GmbH, Institut für Energie und Klimaforschung - Werkstoffsynthese und Herstellungsverfahren (IEK-1), 52425 Jülich, Germany

Microstructure and tribological properties of hybrid feedstock derived arc sprayed Babbitt/WC-CoCr and Babbitt/Mo composite coatings

Ali Eskandari, Mohit Gupta, Shrikant Joshi

University West, Sweden

New Diagnostic Results and Investigations of DC Cascaded Multiple Anode Plasma Generators

Stephan Zimmermann¹, Jochen Schein¹, Tim Königstein², Andreas Wank²

¹UniBw München LPT, Germany; ²GTV Verschleißschutz GmbH, Germany

Numerical simulation of plasma thermal spraying with substrate interaction

Riad Horr¹, Mohamed Kezrane¹, Redha Rebhi¹, Sabrina Horr²

¹University of Yahia Fares at Médea, Algeria; ²University of Echahid Hamma Lakhdar at El Oued, Algeria

Process-Microstructure-Property Relationship of Plasma Sprayed Ceramic Thermal Barrier Coatings on Internal Diameters (ID) Surfaces

Maheshwar Rao Bagathi, Robert Vassen, Georg Mauer, Olivier Guillon

Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, IEK-¹Materials Synthesis and Processing, 52425 Jülich, Germany

Residual stress depth distributions in cold gas sprayed metallic coatings - Influence of process parameters

Dhruvit Gabani¹, Zohreh Arabgol², Levke Wiehler², Sören Nielsen², Hongjian Wu², Alexander List², Thomas Klassen², Frank Gärtner², Astrid Pundt¹, Jens Gibmeier¹

¹Karlsruhe Institute of Technology (KIT), Germany; ²Helmut Schmidt University, Hamburg, Germany

Residual Stresses Induced by Alloy 718 Cold Gas Repair Spray of Large Cavities - on the Influence of the Sample Geometry

Florian Lang¹, Johannes-Christian Schmitt², Thilo Pirling³, Robert Vaßen², Jens Gibmeier¹

¹Institute for Applied Materials (IAM-WK), Karlsruhe Institute of Technology (KIT), Germany; ²Institute of Energy and Climate Research (IEK-1), Forschungszentrum Jülich GmbH, Germany; ³Institut Laue-Langevin, France

Solution Precursor Plasma Spraying of metal oxides functional coatings

Mathieu Tartarin¹, Simon Goutier¹, Vincent Rat¹, Geoffroy Rivaud¹, Christophe Chazelas¹, Pascal Andre², Alan Kéromnès¹

¹IRCER, UMR CNRS 7315 Université de Limoges, Limoges; ²Laboratoire de Physique de Clermont, UMR CNRS 6533, Université Clermont Auvergne, Clermont-Ferrand

The evaluation of gas turbine real parts condition after service with and without TBC

Mahdi Bozorg Nezhad Nobijari

PARTO, Iran, Islamic Republic of

The influence of laser mictrotexturing on the microstructure and oxidation behavior of free-standing NiCrAlY under high-temperature conditions

Tomasz Kielczawa¹, Pawel Sokolowski¹, Hanna Myalska-Glowacka², Grzegorz Moskal²

¹Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Lukasiewicza 5, 50-371 Wroclaw, Poland; ²Faculty of Materials Science, Silesian University of Technology, Krasinskiego 8, 40-019 Katowice, Poland

Thermal spraying of sol-gel materials

Anna Gibas, Wioletta Seremak

Sol-Gel Materials Research Group, Wroclaw University of Science and Technology, Wroclaw, Poland

Antiviral coatings for elements of sanitary fittings

Adriana Wrona¹, Alicja Hryniszyn¹, Jacek Mazur¹, Kinga Czechowska¹, Klaudia Pepłowska¹, Anna Czech¹, Małgorzata Osadnik¹, Krzysztof Pęca¹, Olgierd Jeremiasz², Bartłomiej Pawłowski², Radosław Pawłowsk²

¹Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Gliwice, Poland; ²Helioenergia sp. z o.o., Czerwionka-Leszczyny, Poland

Adhesion of Thermal Barrier Coatings: influence of the bond coat application technique

Carlos Roberto Camello Lima¹, Victor Crespo², Jaume Nin³, Genis Clavé⁴, Sergi Dosta⁴

¹Mackenzie Presbyterian University, Brazil; ²Cromomed SA, Spain; ³TMComas; ⁴University of Barcelona

Microstructural and Mechanical Features of Cold Sprayed Inconel 738 in the context of Laser Additive Manufacturing

Vincent Guipont, Clea Plouze

MINES Paris - PSL Centre des Matériaux, UMR CNRS 7633, France

Aerosol-assisted low-pressure cold spraying of TiO2 suspension

Anna Gibas, Marcin Winnicki, Agnieszka Baszczuk

Wroclaw University of Science and Technology, Poland

Influences of Powder Purity and Process Parameter Sets in Aerosol Depostion of Cr2AlC MAX Phase Powder

Andreas Elsenberg¹, Frank Gärtner¹, Jesus Gonzalez-Julian^2,3, Robert Vaßen³, Thomas Klassen¹

¹Helmut Schmidt University Hamburg, University of the Federal Armed Forces Hamburg, Germany; ²Chair of Ceramics, Institue of Mineral Engineering, RWTH Aachen University, Germany; ³Institute of Energy and Climate Research: Materials Synthesis and Processing (IEK-1), Forschungszentrum Jülich, Germany

Significance of in-flight powder energy for inter-splat bonding in cold sprayed coatings

Neelima Devi Guduru^1,2, Kumar S¹, Venu Gopal A²

¹International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), India; ²National Institute of Technology Warangal, (NITW)

A new high efficiency material for flash carbide coatings

Guido Reisel

Oerlikon Metco, Germany

High Density Powders for High Density Coatings

Richard Trache¹, Karl Körner¹, Matthias Leitner¹, Nicholas Curry²

¹Treibacher Industrie AG, Austria; ²Thermal Spray Innovations, Austria

Design of new oxide feedstock material compositions for surface technologies

Susan Conze, Lutz-Michael Berger, Ludwig Georg Kretschmann, Manfred Fries

Fraunhofer IKTS, Germany

Cold Sprayed High Entropy Alloys (HEAs) and MCrAlY Overlay Coatings: a Comparative Study on their High Temperature Oxidation Behaviour

Cristian Victor Cojocaru, Maniya Aghasibeig, Eric Irissou

National Research Council of Canada (NRC), Boucherville, QC, Canada

Impact wear behavior of alloyed Cr3C2-NiCr and TiCN-based HVOF sprayed coatings

Šárka Houdková¹, Lutz-Michael Berger², Josef Daniel³, Marek Vostřák¹, Tomáš Taranda¹, Josef Duliškovič¹, Ondřej Skála¹

¹Research and Testing Institute Plzen, Czech Republic; ²Fraunhofer-Institut für Keramische Technologien und Systeme IKTS, Germany; ³Institute of Scientific Instruments, CAS, Czech Republic

Development, structure analysis and grinding of thermally sprayed quasi-crystalline (QC) Al-Cu-Fe coatings

Ingor Baumann¹, Monika Kipp², Jonas Frederik Zajaczkowski¹, Jannis Saelzer², Mukul Aravind Kada¹, Wolfgang Tillmann¹, Dirk Biermann², Marko Sipura³, Nenad Piljic⁴

¹Institute of Materials Engineering, TU Dortmund University, Dortmund, Germany; ²Institute of Machining Technology, TU Dortmund University, Dortmund, Germany; ³MD Global Trading GmbH, Bad Wimsbach, Austria; ⁴DANEN TRADE GmbH, Salzburg, Austria

Heterogeneous structural features of microplasma-sprayed hydroxyapatite splats revealed by TEM

Xiaomei Liu, Yi Liu, Jing Huang, Hua Li

Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, China, People's Republic of

Suspension Spraying of Calcium Phosphate Coatings with Antibacterial Properties

Maria Carolina Lanzino, Andreas Killinger

University of Stutttgart, Germany

Thermal Cycling Performance of Suspension Plasma Sprayed TBCs with Radial Suspension Injection

Jens Igel¹, Daniel Emil Mack¹, Olivier Guillon^1,2, Robert Vaßen^1,3

¹Forschungszentrum Jülich GmbH, Germany; ²Jülich Aachen Research Alliance, JARA-Energy, Germany; ³Institut für Werkstoffe, Ruhr-Universität Bochum, Germany

Parameters influencing the photocatalytic activity of suspension-sprayed coatings in the binary ZnO-TiO2 system

Anja Meyer¹, Filofteia-Laura Toma², Oliver Kunze^2,3, Stefan Scheitz², Annegret Potthoff¹, Christoph Leyens^2,3

¹Fraunhofer Institute for Ceramic Technologies and Systems IKTS Dresden, Germany; ²Fraunhofer Institute for Material and Beam Technology IWS Dresden, Germany; ³Institute of Materials Science, Technische Universität Dresden, Germany

Thermal cycling tests on APS and SPS TBC systems on additively manufactured samples with cooling holes

Martin Johannes Rüßmann¹, Emine Bakan¹, Daniel Emil Mack¹, Susanne Schrüfer², Olivier Guillon^1,3, Robert Vaßen^1,4

¹Forschungszentrum Jülich GmbH, Germany; ²Materials Engineering, Rolls-Royce Deutschland, Blankenfelde-Mahlow, Germany; ³RWTH Aachen, Aachen, Germany; ⁴Institut für Werkstoffe, Ruhr-Universität Bochum, Bochum, Germany

Wear protection coatings with low porosity and surface roughness, applied by means of high velocity oxy-fuel suspension flame spraying

Sylvain Badie, Harry Kummer, Fabian Trenkle, Jeremias Blum, Max Winkelmann, Sven Hartmann

obz innovation gmbh, Germany

Enhancing Coating Performance: Cold Spray of Al-Alloy with Quasicrystal Reinforcement

Reza Jafari¹, Mari Honkanen², Eero Helmi¹, Jarkko Lehti¹, Anssi Metsähonkala¹, Minnamari Vippola^1,2, Heli Koivuluoto¹

¹Tampere University, Materials Science and Environmental Engineering, Tampere, Finland; ²Tampere University, Tampere Microscopy Center, Tampere, Finland

Aluminum-Aluminum Compound Casting Supported by Cold Sprayed Interlayers

Alexander List¹, Dirk Lehmhus², Frank Gärtner¹, Thomas Klassen¹

¹Institute of Materials Technology, Helmut Schmidt University, University of the Federal Armed Forces Hamburg; ²Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM

Serial Manufacturing of Cold Spraying for High-volume Applications

Sascha Bernhardt, Leonhard Holzgaßner, Reeti Singh, Markus Brotsack

Impact Innovations GmbH, Germany

Processing of Advanced Powders for Thermal Spray Technologies

Ladislav Celko¹, Vendula Bednarikova¹, Michaela Remesova¹, Pavel Gejdos¹, Karel Slamecka^1,2, Serhii Tkachenko¹, Karel Zabransky¹

¹CEITEC - Central European Institute of Technology, Brno University of Technology, Purkynova 656/123, 612 00 Brno, Czech Republic; ²Faculty of Mechanical Engineering, Brno University of Technology, Technicka 2896/2, 616 69 Brno, Czech Republic

Metal oxide and carbon-based nanoparticles for SPS coatings with antimicrobial properties

Alicja Duda^1,2, Klaudia Pepłowska¹, Kinga Czechowska¹, Alicja Hryniszyn¹, Jacek Mazur¹, Adrian Radoń¹, Agnieszka Ciuraszkiewicz^1,3, Witold Kurylak¹, Adriana Wrona¹

¹Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Gliwice, Poland; ²Doctoral School, Silesian University of Technology, Gliwice, Poland; ³Institute of Metallurgy and Materials Science, Polish Academy of Sciences, Krakow, Poland

The effect of feedstock powder and spray distance on sliding wear and cavitation erosion of HVOF cermet coatings deposited on AZ31

Ewa Jonda¹, Leszek Łatka², Mirosław Szala³, Mariusz Walczak³, Marcin Godzierz⁴

¹Silesian University of Techology, Poland; ²Wrocław University of Science and Technology, Poland; ³Lublin University of Technology, Poland; ⁴Centre of Polymer and Carbon Materials, Polish Academy of Sciences

Influence of configuration entropy on SPPS-deposited high-entropy oxide anode coatings in electrochemical water splitting

Zexin YU¹, Botong WANG², Taikai LIU³, Andreas KILLINGER¹

¹Institute for Manufacturing Technologies of Ceramic Components and Composites, University of Stuttgart, Germany; ²School of Mechanical and Electrical Engineering, Soochow University, China; ³Institute of New Materials, Guangdong Academy of Science, National Engineering Laboratory for Modern Materials Surface Engineering Technology, China

Cavitation-resistant WC-Ni coatings with biomimic hierarchical structures constructed by cold spray and laser re-melting treatment

Hua Li

Chinese Academy of Sciences, China, China, People's Republic of

Die Forging and Rotary Swaging of Cold Sprayed Al/Ti Material Compounds

Rico Drehmann¹, Pascal Colditz², Marcel Graf¹, Alexander List³, Frank Gärtner³, Birgit Awiszus², Thomas Lampke¹

¹Materials and Surface Engineering Group, Institute of Materials Science and Engineering, Chemnitz University of Technology, Germany; ²Professorship Virtual Production Engineering, Institute for Machine Tools and Production Processes, Chemnitz University of Technology, Germany; ³Institute of Materials Technology, Helmut Schmidt University/University of the Federal Armed Forces Hamburg, Germany

Development and laser vitrification processing of thermally sprayed enamel coatings

Filofteia-Laura Toma¹, Anja Meyer², Imanol Cuevas³, Juan Isaza³, Marian Angeles Corres⁴, David Vélez⁴, Jaime Ochoa Saenz de la Fuente⁴, Jens Putzier⁵

¹Fraunhofer Institute for Material and Beam Technology IWS, Dresden, Germany; ²Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany; ³Electronic and Opto-Mechanic Engineering EXOM S.L., Barakaldo, Spain; ⁴CIDETEC, Surface Engineering Institute, San Sebastián, Spain; ⁵Putzier Oberflächentechnik GmbH, Leichlingen, Germany

A study on post-processing of Aerosol Cold Sprayed Ti3AlC2 MAX phase coatings via heat treatment and spark plasma sintering

Grzegorz Kubicki^1,2, Jakub Wiśniewski^1,2, Dariusz Garbiec¹, Jarosław Jakubowicz³

¹Łukasiewicz Research Network - Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755 Poznan, Poland; ²Faculty of Materials Engineering and Technical Physics, Poznan University of Technology, 24 Jana Pawla II St., 61-138 Poznan, Poland; ³Institute of Materials Science and Engineering, Poznan University of Technology, 24 Jana Pawla II St., 61-138 Poznan, Poland

Alloying of composite Cu-Al cold sprayed coatings by near-infrared radiation

Marcin Winnicki, Anna Gibas, Wioletta Seremak, Agnieszka Baszczuk, Marek Jasiorski

Wrocław University of Science and Technology, Poland

Spray parameters development and CMAS-Induced Degradation of Non-Flammable Suspension Plasma Sprayed (SPS) YSZ Coatings

Tanvir Hussain, Siddharth Lokachari, Amiya Chowdhury, Kah Leng

University of Nottingham, United Kingdom

Suspension plasma sprayed ytterbium disilicate coating: Phase stability and microstructural evolution in extreme environments

Ebenezer Berko Owusu¹, Acacio Rincon Romero¹, Alex Lynam¹, Buhao Zhang¹, Oriol Gavalda Diaz², Tanvir Hussain¹

¹University of Nottingham, United Kingdom; ²Imperial College London, United Kingdom

From Porous To Columnar – Axial Plasma Spraying of Thermal Barrier Coatings

Nicholas Curry, Neil Young, Zhaolin Tang

Northwest Mettech Corporation, Canada

Tailoring the bond coat topography by laser microtexturing for various processes of TBC top coat deposition

Tomasz Kielczawa¹, Tadeusz Kubaszek², Pawel Pedrak², Radek Musalek³, Pawel Sokolowski¹

¹Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Wrocław, Poland; ²Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Rzeszow, Poland; ³Institute of Plasma Physics of the Czech Academy of Sciences, Prague, Czech Republic

Assessment of Complex Load Conditions in Burner Rig Environment by Hybrid Image Analysis

Daniel Emil Mack

Forschungszentrum Jülich, Germany

Breakthrough for deposition and properties of fully dense Ni-based alloy coating by APS enabled by full oxidation protection of boron

Chang-Jiu Li, Xin-Yuan Dong, Jiu-Jing Song, Yong-Sheng Zhu, Xiao-Tao Luo

Xi'an Jiaotong University, China, People's Republic of

Investigations on a cascaded DC single cathode single anode plasma generator

Stephan Zimmermann¹, Jochen Schein¹, Kirsten Bozin², Hendrik Heinemann²

¹UniBw München (LPT), Germany; ²RWTH Aachen University (IOT), Germany

Experimental Characterization of the Operation of Modular Cascade Plasma Torches

Myriam Sleiman¹, Geoffrey Darut¹, Marie-Pierre Planche¹, Ralph Seulin¹, Jean-Jacques Gonzalez², Pierre Freton², Francis Sambou², Armando Salito³, Manfred Roesli³

¹UTBM, CNRS, ICB, F-90010 Belfort cedex, France; ²LAPLACE, UMR 5213 CNTS-INP-UPS, université de Toulouse, France; ³Gulhfi Consulting AG Switzerland, Schweiz, Switzerland

Visualization and optimization of feedstock injection during plasma spraying using shadowgraphy and particle detection algorithms

Tomasz Kielczawa, Karolina Wiatrzyk, Jakub Piwowar, Marcin Korzeniowski, Adam Sajbura, Pawel Sokolowski

Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Lukasiewicza 5, 50-371 Wroclaw, Poland

Modelling of suspension plasma spraying - State of the art and gaps for process digitization

Anis Chergui, Anissa Djema, Jyothikrishna Perambadur, Christophe Chazelas, Simon Goutier, Alan Kéromnès, Gilles Mariaux, Vincent Rat, Armelle Vardelle

University of Limoges, Institute of Research for Ceramics, France

Analytical model of the ceramic insulation layer of TBC systems based on qualitative and quantitative descriptions of microstructure

Grzegorz Jan Moskal, Stanisław Roskosz, Anna Jasik, Grzegorz Kokot

Silesian University of Technology, Poland

Simulation-supported process development for the deposition of HVAF-sprayed NiCoCrAlY coatings

Kirsten Bobzin, Hendrik Heinemann, Kevin Jasutyn

Surface Engineering Institute (IOT) RWTH Aachen University, Germany

Nozzle geometry optimization for cold spay applications by using 3D CFD calculations

Julio Gutierrez, Thomas Klassen, Frank Gärtner, Alexander List

Helmut-Schmidt-Universität, Germany

Novel metallic coatings obtained by thermal spray tecnologies

Sergi Dosta¹, Genís Clavé¹, Camila Barreneche¹, Anna Martin Vilardell²

¹Universitat de Barcelona - Dept. of Materials Science and Physical Chemistry, Spain; ²Fraunhofer Institut für Werkstoff- und Strahltechnik IWS, Germany

Stabilization of the α-phase in atmospheric plasma sprayed (Al,Cr,Ti)2O3 solid solution coatings and its effect on the electrical properties

Maximilian Grimm¹, Lutz-Michael Berger², Susan Conze², Thomas Lindner¹, Thomas Lampke¹

¹Chemnitz University of Technology, Materials and Surface Engineering Group, Germany; ²Fraunhofer Institute for Ceramic Technologies and Systems, Germany

APS, F-HVOF and HVSFS sprayed Ni20Cr Resistant Heater Coatings

Marvin Sauter¹, Christian Semmler¹, Luca Bortolotti², Giulia Poppi², Giovanni Bolelli², Luca Lusvarghi², Andreas Killinger¹

¹Institut für Fertigungstechnologie keramischer Bauteile, Universität Stuttgart; ²Dipartimento di Ingegneria ”Enzo Ferrari”, Università di Modena e Reggio Emilia

Protective coating against erosion by thermal spraying on asphalt

Yamina Mebdoua Lahmar, Hadj Lahmar, Nadjet Bouhelal, Nacer Dilmi

Center for Development of Advanced Technologies, Algeria

Progress Update on EBC Research at IEK-1

Emine Bakan, Robert Vaßen

Forschungszentrum Jülich, Germany

Influence of advanced microstructural parameters on thermal shock resistance of DVC Y-PSZ/CoNiCrAlY TBC systems deposited on different superalloy substrates

Giulia Pedrizzetti¹, Rita Bottacchiari¹, Lidia Baiamonte¹, Erica Scrinzi², Elvira Giubbolini², Francesco Marra¹, Giovanni Pulci¹

¹Department of Chemical Engineering, Materials, Environment, Sapienza University of Rome, INSTM Reference Laboratory for Engineering of Surface Treatments, Via Eudossiana 18, 00184 Rome, Italy; ²Nuovo Pignone Tecnologie Srl, Baker Hughes, Via Felice Matteucci 2, 50127 Florence, Italy;

New developments in the field of thermal barrier coatings

Robert Vaßen, Jens Igel, Jana Joeris, Martin Rüssmann

Forschungszentrum Jülich, Germany

The role of process to apply bond-coat on TBC performance

Mahdi Bozorg Nezhad Nobijari, Sadegh Mastali

PARTO, Iran, Islamic Republic of

Thermal Spray Coatings on Additive Manufactured Components: Literature and Experimental Findings

Maria Francesca Bonilauri¹, Luca Lusvarghi¹, Riccardo Franci², Mario Franchi², Francesco Marra³, Laura Paglia³, Matteo Perini⁴, Sasan Amirabdollahian⁴, Alessandro Morri⁵, Giovanni Bolelli¹

¹Dipartimento di Ingegneria “Enzo Ferrari”, Università di Modena e Reggio Emilia, Italy; ²Il Sentiero International Campus S.r.l., Via Friuli 11, 36015 Schio, Italy; ³Dipartimento di Ingegneria Chimica Materiali Ambiente, Universita` di Roma - 1 “La Sapienza”, Italy; ⁴ProM Facility - Trentino Sviluppo, Via Fortunato Zeni 8, 38068 (TN), Italy; ⁵Dipartimento di Ingegneria Industriale, Università di Bologna, Italy

Fabrication and performance of all-solid-state Li-ion battery components derived by powder and suspension plasma spraying

Vasanth Gopal, Stefan Björklund, Shrikant Joshi

Department of Engineering Science, University West, SE-461 86 Trollhättan, Sweden

Investigation into the Formation and Characteristics of fine CoNiCrAlY Splats on Stainless Steel Tubes Using Inner Diameter HVOF Spraying

Wolfgang Tillmann, Jonas Frederik Zajaczkowski, Ingor Baumann, Volkan Solak

Institute of Materials Engineering, TU Dortmund University, Germany

Development of plasma parameters for the manufacture of MCrAlY-bond coats by low-pressure plasma spraying using a cascading torch

Georg Mauer

Forschungszentrum Jülich GmbH, Germany

Greybox modelling for the prediction of efficiency in thermal spray processes

Hendrik Heinemann, Kirsten Bobzin, Ali Dokhanchi

IOT RWTH Aachen, Germany

Developing High-Entropy Alloy (HEA)-based coatings by combined experiments and Integrated Computational Materials Engineering (ICME)

Giovanni Bolelli¹, Luca Bortolotti¹, Lorenzo Ferrari¹, Stefania Morelli¹, Luca Lusvarghi¹, Alvise Bianchin², Enrico Forlin², Sergi Dosta³, Klaas Rozema⁴, Giulia Gigante⁵, Edoardo Rossi⁵, Anssi Laukkanen⁶, Tomi Suhonen⁶, Song Lu⁶, Markus Apel⁷, Thomas Bähr⁷

¹Dipartimento di Ingegneria "Enzo Ferrari", Università di Modena e Reggio Emilia, Italy; ²MBN Nanomaterialia SpA, Italy; ³Departament de Ciència dels Materials i Química Física, Universitat de Barcelona, Spain; ⁴Titomic Europe b.v., The Netherlands; ⁵Dipartimento di Ingegneria civile, informatica e delle tecnologie aeronautiche, Università di Roma - 3, Italy; ⁶VTT Technical Research Center of Finland; ⁷Access e.V., Germany

Cold Spray Track Modeling and its Applications

Hongjian Wu¹, Marcel Lewke², Alexander List¹, Frank Gärtner¹, Thomas Klassen¹

¹Institute of Materials Technology, Helmut Schmidt University/University of the Federal Armed Forces Hamburg, 22043 Hamburg, Germany.; ²Institute of Automation Technology, Helmut Schmidt University/University of the Federal Armed Forces Hamburg, 22043 Hamburg, Germany.

Results of DFT simulations as a source of materials data for analytical prediction of thermal and mechanical properties of TBC systems

Grzegorz Jan Moskal

Silesian University of Technology, Poland

Alternative fracture test methodologies applicable for thermal spray coatings

Nagamani Jaya Balila

Indian Institute of Technology Bombay, India

Selected properties of thermally sprayed metallic glass coatings

Aleksandra Malachowska¹, Pawel Sokolowski¹, Adam Sajbura¹, Sergi Dosta²

¹Wroclaw University of Science and Technology, Poland; ²University of Barcelona, Spain

Frequency domain thermoreflectance technique for characterisation of coatings

Hans-W. Marx¹, Vincent Linseis¹, Sebastian Feulner¹, Juan Sebastian Reparaz²

¹LINSEIS Messgeräte GmbH, Selb, Germany; ²Institut de Ciència de Materials de Barcelona, ICMAB-CSIC, Bellaterra, Spain

Microstructure, Residual Stress and Interfacial Fracture Toughness in Suspension Plasma Sprayed Thermal Barrier Coating

Shijie Zhu¹, Yuki Okuyama¹, Youichirou Habu², Tatsuo Suidzu²

¹Fukuoka Institute of Technology, Japan; ²TOCALO Co., Ltd., Japan

Development of thermally sprayed anti-microbial wear protection layers

W. Tillmann, J. F. Zajaczkowski, I. Baumann

Technische Universitat Dortmund, Germany

Multifunctional thermally sprayed coatings for outdoor applications

Heli Koivuluoto, Betul Aktas, Reza Jafari, Niklas Kandelin, Ruqaya Khammas

Tampere University, Faculty of Engineering and Natural Sciences, Materials Science and Environmental Engineering, Tampere, Finland

The development of spinel-type high-entropy oxides coatings with oxygen vacancies via solution precursor plasma spraying techniques in multifunctional applications

Lei Xie¹, Chengdong Zhao¹, Zexin Yu¹, Botong Wang², Andreas Killinger¹, Chao Zhang³

¹IFKB, University of Stuttgart, Germany; ²School of Mechanical and Electrical Engineering, Soochow University, China; ³College of Mechanical Engineering, Yangzhou University, China

The Impact of Atmospheric Plasma Spraying Conditions on Radiopaque Bioactive Glass Coatings for Implant Applications

Laurène Youssef¹, Erwan Bussy¹, German Andres Clavijo Mejia², Martin Michálek², Amandine Magnaudeix¹, Alain Denoirjean¹

¹IRCER CNRS UMR7315, University of Limoges, France; ²FunGlass institute, Alexander Dubček University of Trenčín, Slovakia