| Session | ||
Lunch Break / Poster Exhibition
| ||
| Presentations | ||
Formation of nanoceramic oxide APS coatings on glass with photocatalytic properties 1Łukasiewicz Research Network - Institute of Non-Ferrous Metals, 44-100 Gliwice, Poland; 2Łukasiewicz Research Network – Institute for Engineering of Polymer Materials and Dyes, 87-100 Toruń, Polska; 3Doctoral School, Silesian University of Technology, 44-100, Gliwice, Poland Modelling of cold spray using IN718 with a focus on spray spot optimization 1Institute of Energy and Climate Research (IEK-1), Forschungszentrum Jülich GmbH, Jülich, Germany; 2JARA Energy, Jülich Aachen Research Alliance, Jülich, Germany; 3Institut für Werkstoffe, Ruhr University Bochum, Bochum, Germany Protective Thermal Spray Coatings for TES applications. Universitat de Barcelona, Spain Degradation processes characterization in dual-phase Ln2Zr2O7+8YSZ TBC systems under oxidation and hot corrosion conditions Silesian University of Technology, Poland TiO2 Powder Modification for Low-Pressure Cold Spraying of the Photocatalytic Coatings: solvent influence in sol-gel process 1Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, Wroclaw, Poland; 2Department of Metal Forming, Welding and Metrology, Wroclaw University of Science and Technology, Wroclaw, Poland Application of image analysis to characterization of TBC systems microstructure Silesian University of Technology, Poland Coatings on oxide fiber-reinforced ceramic composites (OCMC) for high temperature applications University of Stuttgart, Germany Data Acquisition During Thermal Coating And Event-Oriented Evaluation CGS Plasmatechnik UG (haftungsbeschränkt), Germany Deposition of titanium on stainless steel expanded metals using cold gas spraying as an alternative for titanium fleeces in PEM electrolyzers 1Forschungszentrum Jülich, Institute of Energy and Climate Research, Materials Synthesis and Processing (IEK-1); 2Forschungszentrum Jülich, Institute of Energy and Climate Research, Electrochemical Process Engineering (IEK-14) Development of repair methods for single crystal components using thermal spray processes 1Institute of Energy and Climate Research (IEK-1), Forschungszentrum Jülich GmbH, Germany; 2Institute for Materials, Ruhr University Bochum, Germany; 3Department of Materials Science and Engineering, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 4JARA Energy, Jülich Aachen Research Alliance, Germany Higher manganese silicide powder sintering using tungsten inert gas torch 1Center for Development of Advanced Technologies, Algeria; 2Saad Dahleb University, Blida 1 Algeria Influence of bond coat roughness and substrate composition on thermal shock resistance of APS NiCrAlY/Porous Y-PSZ TBC systems on Cr2O3-forming superalloy 1Department of Chemical Engineering, Materials, Environment, Sapienza University of Rome, INSTM Ref-erence Laboratory for Engineering of Surface Treatments, Via Eudossiana 18, 00184 Rome, Italy; 2Nuovo Pignone Tecnologie Srl, Baker Hughes, Via Felice Matteucci 2, 50127 Florence, Italy Influence of high-temperature exposure on the architecture of pores and cracks in TBC systems Silesian University of Technology, Poland Low Pressure Plasma Sprayed Tungsten Coatings on First Wall Components for Future Fusion Devices 1Forschungszentrum Jülich GmbH, Institut für Energie und Klimaforschung - Plasmaphysik (IEK-4), 52425 Jülich, Germany; 2Forschungszentrum Jülich GmbH, Institut für Energie und Klimaforschung - Werkstoffsynthese und Herstellungsverfahren (IEK-1), 52425 Jülich, Germany Microstructure and tribological properties of hybrid feedstock derived arc sprayed Babbitt/WC-CoCr and Babbitt/Mo composite coatings University West, Sweden New Diagnostic Results and Investigations of DC Cascaded Multiple Anode Plasma Generators 1UniBw München LPT, Germany; 2GTV Verschleißschutz GmbH, Germany Numerical simulation of plasma thermal spraying with substrate interaction 1University of Yahia Fares at Médea, Algeria; 2University of Echahid Hamma Lakhdar at El Oued, Algeria Process-Microstructure-Property Relationship of Plasma Sprayed Ceramic Thermal Barrier Coatings on Internal Diameters (ID) Surfaces Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, IEK-1Materials Synthesis and Processing, 52425 Jülich, Germany Residual stress depth distributions in cold gas sprayed metallic coatings - Influence of process parameters 1Karlsruhe Institute of Technology (KIT), Germany; 2Helmut Schmidt University, Hamburg, Germany Residual Stresses Induced by Alloy 718 Cold Gas Repair Spray of Large Cavities - on the Influence of the Sample Geometry 1Institute for Applied Materials (IAM-WK), Karlsruhe Institute of Technology (KIT), Germany; 2Institute of Energy and Climate Research (IEK-1), Forschungszentrum Jülich GmbH, Germany; 3Institut Laue-Langevin, France Solution Precursor Plasma Spraying of metal oxides functional coatings 1IRCER, UMR CNRS 7315 Université de Limoges, Limoges; 2Laboratoire de Physique de Clermont, UMR CNRS 6533, Université Clermont Auvergne, Clermont-Ferrand The evaluation of gas turbine real parts condition after service with and without TBC PARTO, Iran, Islamic Republic of The influence of laser mictrotexturing on the microstructure and oxidation behavior of free-standing NiCrAlY under high-temperature conditions 1Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Lukasiewicza 5, 50-371 Wroclaw, Poland; 2Faculty of Materials Science, Silesian University of Technology, Krasinskiego 8, 40-019 Katowice, Poland Thermal spraying of sol-gel materials Sol-Gel Materials Research Group, Wroclaw University of Science and Technology, Wroclaw, Poland Antiviral coatings for elements of sanitary fittings 1Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Gliwice, Poland; 2Helioenergia sp. z o.o., Czerwionka-Leszczyny, Poland Adhesion of Thermal Barrier Coatings: influence of the bond coat application technique 1Mackenzie Presbyterian University, Brazil; 2Cromomed SA, Spain; 3TMComas; 4University of Barcelona | ||