Formation of nanoceramic oxide APS coatings on glass with photocatalytic properties

Alicja Duda^1,3, Bartosz Kopyciński^2,3, Łukasz Hawełek¹, Krzysztof Pęcak^1,3, Piotr Tomczyk¹, Grzegorz Muzia¹, Adriana Wrona¹

1: Łukasiewicz Research Network - Institute of Non-Ferrous Metals, 44-100 Gliwice, Poland; 2: Łukasiewicz Research Network – Institute for Engineering of Polymer Materials and Dyes, 87-100 Toruń, Polska; 3: Doctoral School, Silesian University of Technology, 44-100, Gliwice, Poland

Modelling of cold spray using IN718 with a focus on spray spot optimization

Johannes-Christian Schmitt¹, Jochen Fiebig¹, Robert Mücke¹, Olivier Guillon^1,2, Robert Vaßen^1,3

1: Institute of Energy and Climate Research (IEK-1), Forschungszentrum Jülich GmbH, Jülich, Germany; 2: JARA Energy, Jülich Aachen Research Alliance, Jülich, Germany; 3: Institut für Werkstoffe, Ruhr University Bochum, Bochum, Germany

Protective Thermal Spray Coatings for TES applications.

Lorena Betancor Cazorla, Camila Barreneche, Adela Svobodova-Sedlackova, Genís Clavé, Sergi Dosta

Universitat de Barcelona, Spain

Degradation processes characterization in dual-phase Ln2Zr2O7+8YSZ TBC systems under oxidation and hot corrosion conditions

Grzegorz Moskal, Hanna Myalska-Głowacka, Amjad Iqbal, Jahangir Khan

Silesian University of Technology, Poland

TiO2 Powder Modification for Low-Pressure Cold Spraying of the Photocatalytic Coatings: solvent influence in sol-gel process

Wioletta Seremak¹, Marek Jasiorski¹, Agnieszka Baszczuk¹, Marcin Winnicki²

1: Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, Wroclaw, Poland; 2: Department of Metal Forming, Welding and Metrology, Wroclaw University of Science and Technology, Wroclaw, Poland

Application of image analysis to characterization of TBC systems microstructure

Stanisław Roskosz, Moskal Grzegorz

Silesian University of Technology, Poland

Coatings on oxide fiber-reinforced ceramic composites (OCMC) for high temperature applications

Ebru Gyoktepeliler Akin, Andreas Killinger

University of Stuttgart, Germany

Data Acquisition During Thermal Coating And Event-Oriented Evaluation

Stephan Zimmermann, Christian Rupprecht, Gerd Paczkowski

CGS Plasmatechnik UG (haftungsbeschränkt), Germany

Deposition of titanium on stainless steel expanded metals using cold gas spraying as an alternative for titanium fleeces in PEM electrolyzers

Tim Sievert¹, Sarah Zerressen², Martin Bram¹, Andreas Glüsen², Olivier Guillon¹, Robert Vaßen¹

1: Forschungszentrum Jülich, Institute of Energy and Climate Research, Materials Synthesis and Processing (IEK-1); 2: Forschungszentrum Jülich, Institute of Energy and Climate Research, Electrochemical Process Engineering (IEK-14)

Development of repair methods for single crystal components using thermal spray processes

Maike Letang¹, Aleksander Kostka², Nicolas Karpstein³, Inmaculada López-Galilea², Erdmann Spiecker³, Olivier Guillon^1,4, Robert Vaßen^1,2

1: Institute of Energy and Climate Research (IEK-1), Forschungszentrum Jülich GmbH, Germany; 2: Institute for Materials, Ruhr University Bochum, Germany; 3: Department of Materials Science and Engineering, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 4: JARA Energy, Jülich Aachen Research Alliance, Germany

Higher manganese silicide powder sintering using tungsten inert gas torch

Nadjet Bouhelal^1,2, Yamina Mebdoua Lahmar¹, Mohammed Lamine Benamar²

1: Center for Development of Advanced Technologies, Algeria; 2: Saad Dahleb University, Blida 1 Algeria

Influence of bond coat roughness and substrate composition on thermal shock resistance of APS NiCrAlY/Porous Y-PSZ TBC systems on Cr2O3-forming superalloy

Giulia Pedrizzetti¹, Rita Bottacchiari¹, Lidia Baiamonte¹, Elvira Giubbolini², Erica Scrinzi², Francesco Marra¹, Giovanni Pulci¹

1: Department of Chemical Engineering, Materials, Environment, Sapienza University of Rome, INSTM Ref-erence Laboratory for Engineering of Surface Treatments, Via Eudossiana 18, 00184 Rome, Italy; 2: Nuovo Pignone Tecnologie Srl, Baker Hughes, Via Felice Matteucci 2, 50127 Florence, Italy

Influence of high-temperature exposure on the architecture of pores and cracks in TBC systems

Stanisław Roskosz, Moskal Grzegorz

Silesian University of Technology, Poland

Low Pressure Plasma Sprayed Tungsten Coatings on First Wall Components for Future Fusion Devices

Gunnar Schmidtmann^1,2, Andrey Litnovsky¹, Jan Willem Coenen¹, Robert Vaßen², Sebastijan Brezinsek¹, Christian Linsmeier¹, Olivier Guillon², Georg Mauer²

1: Forschungszentrum Jülich GmbH, Institut für Energie und Klimaforschung - Plasmaphysik (IEK-4), 52425 Jülich, Germany; 2: Forschungszentrum Jülich GmbH, Institut für Energie und Klimaforschung - Werkstoffsynthese und Herstellungsverfahren (IEK-1), 52425 Jülich, Germany

Microstructure and tribological properties of hybrid feedstock derived arc sprayed Babbitt/WC-CoCr and Babbitt/Mo composite coatings

Ali Eskandari, Mohit Gupta, Shrikant Joshi

University West, Sweden

New Diagnostic Results and Investigations of DC Cascaded Multiple Anode Plasma Generators

Stephan Zimmermann¹, Jochen Schein¹, Tim Königstein², Andreas Wank²

1: UniBw München LPT, Germany; 2: GTV Verschleißschutz GmbH, Germany

Numerical simulation of plasma thermal spraying with substrate interaction

Riad Horr¹, Mohamed Kezrane¹, Redha Rebhi¹, Sabrina Horr²

1: University of Yahia Fares at Médea, Algeria; 2: University of Echahid Hamma Lakhdar at El Oued, Algeria

Process-Microstructure-Property Relationship of Plasma Sprayed Ceramic Thermal Barrier Coatings on Internal Diameters (ID) Surfaces

Maheshwar Rao Bagathi, Robert Vassen, Georg Mauer, Olivier Guillon

Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, IEK-1: Materials Synthesis and Processing, 52425 Jülich, Germany

Residual stress depth distributions in cold gas sprayed metallic coatings - Influence of process parameters

Dhruvit Gabani¹, Zohreh Arabgol², Levke Wiehler², Sören Nielsen², Hongjian Wu², Alexander List², Thomas Klassen², Frank Gärtner², Astrid Pundt¹, Jens Gibmeier¹

1: Karlsruhe Institute of Technology (KIT), Germany; 2: Helmut Schmidt University, Hamburg, Germany

Residual Stresses Induced by Alloy 718 Cold Gas Repair Spray of Large Cavities - on the Influence of the Sample Geometry

Florian Lang¹, Johannes-Christian Schmitt², Thilo Pirling³, Robert Vaßen², Jens Gibmeier¹

1: Institute for Applied Materials (IAM-WK), Karlsruhe Institute of Technology (KIT), Germany; 2: Institute of Energy and Climate Research (IEK-1), Forschungszentrum Jülich GmbH, Germany; 3: Institut Laue-Langevin, France

Solution Precursor Plasma Spraying of metal oxides functional coatings

Mathieu Tartarin¹, Simon Goutier¹, Vincent Rat¹, Geoffroy Rivaud¹, Christophe Chazelas¹, Pascal Andre², Alan Kéromnès¹

1: IRCER, UMR CNRS 7315 Université de Limoges, Limoges; 2: Laboratoire de Physique de Clermont, UMR CNRS 6533, Université Clermont Auvergne, Clermont-Ferrand

The evaluation of gas turbine real parts condition after service with and without TBC

Mahdi Bozorg Nezhad Nobijari

PARTO, Iran, Islamic Republic of

The influence of laser mictrotexturing on the microstructure and oxidation behavior of free-standing NiCrAlY under high-temperature conditions

Tomasz Kielczawa¹, Pawel Sokolowski¹, Hanna Myalska-Glowacka², Grzegorz Moskal²

1: Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Lukasiewicza 5, 50-371 Wroclaw, Poland; 2: Faculty of Materials Science, Silesian University of Technology, Krasinskiego 8, 40-019 Katowice, Poland

Thermal spraying of sol-gel materials

Anna Gibas, Wioletta Seremak

Sol-Gel Materials Research Group, Wroclaw University of Science and Technology, Wroclaw, Poland

Antiviral coatings for elements of sanitary fittings

Adriana Wrona¹, Alicja Hryniszyn¹, Jacek Mazur¹, Kinga Czechowska¹, Klaudia Pepłowska¹, Anna Czech¹, Małgorzata Osadnik¹, Krzysztof Pęca¹, Olgierd Jeremiasz², Bartłomiej Pawłowski², Radosław Pawłowsk²

1: Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Gliwice, Poland; 2: Helioenergia sp. z o.o., Czerwionka-Leszczyny, Poland

Adhesion of Thermal Barrier Coatings: influence of the bond coat application technique

Carlos Roberto Camello Lima¹, Victor Crespo², Jaume Nin³, Genis Clavé⁴, Sergi Dosta⁴

1: Mackenzie Presbyterian University, Brazil; 2: Cromomed SA, Spain; 3: TMComas; 4: University of Barcelona

Breakthrough for deposition and properties of fully dense Ni-based alloy coating by APS enabled by full oxidation protection of boron

Chang-Jiu Li, Xin-Yuan Dong, Jiu-Jing Song, Yong-Sheng Zhu, Xiao-Tao Luo

Xi'an Jiaotong University, China, People's Republic of

Investigations on a cascaded DC single cathode single anode plasma generator

Stephan Zimmermann¹, Jochen Schein¹, Kirsten Bozin², Hendrik Heinemann²

1: UniBw München (LPT), Germany; 2: RWTH Aachen University (IOT), Germany

Experimental Characterization of the Operation of Modular Cascade Plasma Torches

Myriam Sleiman¹, Geoffrey Darut¹, Marie-Pierre Planche¹, Ralph Seulin¹, Jean-Jacques Gonzalez², Pierre Freton², Francis Sambou², Armando Salito³, Manfred Roesli³

1: UTBM, CNRS, ICB, F-90010 Belfort cedex, France; 2: LAPLACE, UMR 5213 CNTS-INP-UPS, université de Toulouse, France; 3: Gulhfi Consulting AG Switzerland, Schweiz, Switzerland

Visualization and optimization of feedstock injection during plasma spraying using shadowgraphy and particle detection algorithms

Tomasz Kielczawa, Karolina Wiatrzyk, Jakub Piwowar, Marcin Korzeniowski, Adam Sajbura, Pawel Sokolowski

Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Lukasiewicza 5, 50-371 Wroclaw, Poland

Thermal Spray Coatings on Additive Manufactured Components: Literature and Experimental Findings

Maria Francesca Bonilauri¹, Luca Lusvarghi¹, Riccardo Franci², Mario Franchi², Francesco Marra³, Laura Paglia³, Matteo Perini⁴, Sasan Amirabdollahian⁴, Alessandro Morri⁵, Giovanni Bolelli¹

1: Dipartimento di Ingegneria “Enzo Ferrari”, Università di Modena e Reggio Emilia, Italy; 2: Il Sentiero International Campus S.r.l., Via Friuli 11, 36015 Schio, Italy; 3: Dipartimento di Ingegneria Chimica Materiali Ambiente, Universita` di Roma - 1 “La Sapienza”, Italy; 4: ProM Facility - Trentino Sviluppo, Via Fortunato Zeni 8, 38068 (TN), Italy; 5: Dipartimento di Ingegneria Industriale, Università di Bologna, Italy

Fabrication and performance of all-solid-state Li-ion battery components derived by powder and suspension plasma spraying

Vasanth Gopal, Stefan Björklund, Shrikant Joshi

Department of Engineering Science, University West, SE-461 86 Trollhättan, Sweden

Investigation into the Formation and Characteristics of fine CoNiCrAlY Splats on Stainless Steel Tubes Using Inner Diameter HVOF Spraying

Wolfgang Tillmann, Jonas Frederik Zajaczkowski, Ingor Baumann, Volkan Solak

Institute of Materials Engineering, TU Dortmund University, Germany

Development of plasma parameters for the manufacture of MCrAlY-bond coats by low-pressure plasma spraying using a cascading torch

Georg Mauer

Forschungszentrum Jülich GmbH, Germany