Permeability and Percolation Response of Thermal Spray Coatings

Sanjay Sampath, John Saputo

Stony Brook University, Stony Brook, NY 11794, USA

Detailed microstructural characterization of WC-Co coatings produced by CGS and HVAF

Soeren Höhn¹, Conze Susan¹, Wonneberger Robert², Drehmann Rico², Cinca Nuria³, Dosta Sergi⁴, Koivuluoto Heli⁵, Lampke Thomas², Unidsz Andreas²

1: Fraunhofer IKTS, Germany; 2: Chemnitz University of Technology, Institute of Materials Science and Engineering; 3: Hyperion Materials & Technologies; 4: Universitat de Barcelona, Departament de Ciència dels Materials i Química Física; 5: Tampere University, Materials Science and Environmental Engineering, Faculty of Engineering and Natural Sciences,

NOVEL BENDING BASED METHODS FOR HGH THROUGHPUT INTERFACE FRACTURE ENERGY MEASUREMENTS OF METAL/CERAMIC INTERFACE

Saim Abbas¹, Sudhanshu Mallick¹, Sanjay Sampath², Balila Nagamani Jaya¹

1: Indian Institute of Technology Bombay, India; 2: Centre for Thermal Spray Research, Stony Brook University, Stony Brook, NY 11794, USA

Physical Methods of Film and Coatings Deposition (provisional title)

Lech Pawlowski

The University of Limoges, France

Impact wear behavior of alloyed Cr3C2-NiCr and TiCN-based HVOF sprayed coatings

Šárka Houdková¹, Lutz-Michael Berger², Josef Daniel³, Marek Vostřák¹, Tomáš Taranda¹, Josef Duliškovič¹, Ondřej Skála¹

1: Research and Testing Institute Plzen, Czech Republic; 2: Fraunhofer-Institut für Keramische Technologien und Systeme IKTS, Germany; 3: Institute of Scientific Instruments, CAS, Czech Republic

Development, structure analysis and grinding of thermally sprayed quasi-crystalline (QC) Al-Cu-Fe coatings

Ingor Baumann¹, Monika Kipp², Jonas Frederik Zajaczkowski¹, Jannis Saelzer², Mukul Aravind Kada¹, Wolfgang Tillmann¹, Dirk Biermann², Marko Sipura³, Nenad Piljic⁴

1: Institute of Materials Engineering, TU Dortmund University, Dortmund, Germany; 2: Institute of Machining Technology, TU Dortmund University, Dortmund, Germany; 3: MD Global Trading GmbH, Bad Wimsbach, Austria; 4: DANEN TRADE GmbH, Salzburg, Austria

Heterogeneous structural features of microplasma-sprayed hydroxyapatite splats revealed by TEM

Xiaomei Liu, Yi Liu, Jing Huang, Hua Li

Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, China, People's Republic of

Cavitation-resistant WC-Ni coatings with biomimic hierarchical structures constructed by cold spray and laser re-melting treatment

Hua Li

Chinese Academy of Sciences, China, China, People's Republic of

Die Forging and Rotary Swaging of Cold Sprayed Al/Ti Material Compounds

Rico Drehmann¹, Pascal Colditz², Marcel Graf¹, Alexander List³, Frank Gärtner³, Birgit Awiszus², Thomas Lampke¹

1: Materials and Surface Engineering Group, Institute of Materials Science and Engineering, Chemnitz University of Technology, Germany; 2: Professorship Virtual Production Engineering, Institute for Machine Tools and Production Processes, Chemnitz University of Technology, Germany; 3: Institute of Materials Technology, Helmut Schmidt University/University of the Federal Armed Forces Hamburg, Germany

Development and laser vitrification processing of thermally sprayed enamel coatings

Filofteia-Laura Toma¹, Anja Meyer², Imanol Cuevas³, Juan Isaza³, Marian Angeles Corres⁴, David Vélez⁴, Jaime Ochoa Saenz de la Fuente⁴, Jens Putzier⁵

1: Fraunhofer Institute for Material and Beam Technology IWS, Dresden, Germany; 2: Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany; 3: Electronic and Opto-Mechanic Engineering EXOM S.L., Barakaldo, Spain; 4: CIDETEC, Surface Engineering Institute, San Sebastián, Spain; 5: Putzier Oberflächentechnik GmbH, Leichlingen, Germany

A study on post-processing of Aerosol Cold Sprayed Ti3AlC2 MAX phase coatings via heat treatment and spark plasma sintering

Grzegorz Kubicki^1,2, Jakub Wiśniewski^1,2, Dariusz Garbiec¹, Jarosław Jakubowicz³

1: Łukasiewicz Research Network - Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755 Poznan, Poland; 2: Faculty of Materials Engineering and Technical Physics, Poznan University of Technology, 24 Jana Pawla II St., 61-138 Poznan, Poland; 3: Institute of Materials Science and Engineering, Poznan University of Technology, 24 Jana Pawla II St., 61-138 Poznan, Poland

Alloying of composite Cu-Al cold sprayed coatings by near-infrared radiation

Marcin Winnicki, Anna Gibas, Wioletta Seremak, Agnieszka Baszczuk, Marek Jasiorski

Wrocław University of Science and Technology, Poland

Novel metallic coatings obtained by thermal spray tecnologies

Sergi Dosta¹, Genís Clavé¹, Camila Barreneche¹, Anna Martin Vilardell²

1: Universitat de Barcelona - Dept. of Materials Science and Physical Chemistry, Spain; 2: Fraunhofer Institut für Werkstoff- und Strahltechnik IWS, Germany

Stabilization of the α-phase in atmospheric plasma sprayed (Al,Cr,Ti)2O3 solid solution coatings and its effect on the electrical properties

Maximilian Grimm¹, Lutz-Michael Berger², Susan Conze², Thomas Lindner¹, Thomas Lampke¹

1: Chemnitz University of Technology, Materials and Surface Engineering Group, Germany; 2: Fraunhofer Institute for Ceramic Technologies and Systems, Germany

APS, F-HVOF and HVSFS sprayed Ni20Cr Resistant Heater Coatings

Marvin Sauter¹, Christian Semmler¹, Luca Bortolotti², Giulia Poppi², Giovanni Bolelli², Luca Lusvarghi², Andreas Killinger¹

1: Institut für Fertigungstechnologie keramischer Bauteile, Universität Stuttgart; 2: Dipartimento di Ingegneria ”Enzo Ferrari”, Università di Modena e Reggio Emilia

Protective coating against erosion by thermal spraying on asphalt

Yamina Mebdoua Lahmar, Hadj Lahmar, Nadjet Bouhelal, Nacer Dilmi

Center for Development of Advanced Technologies, Algeria

Alternative fracture test methodologies applicable for thermal spray coatings

Nagamani Jaya Balila

Indian Institute of Technology Bombay, India

Selected properties of thermally sprayed metallic glass coatings

Aleksandra Malachowska¹, Pawel Sokolowski¹, Adam Sajbura¹, Sergi Dosta²

1: Wroclaw University of Science and Technology, Poland; 2: University of Barcelona, Spain

Frequency domain thermoreflectance technique for characterisation of coatings

Hans-W. Marx¹, Vincent Linseis¹, Sebastian Feulner¹, Juan Sebastian Reparaz²

1: LINSEIS Messgeräte GmbH, Selb, Germany; 2: Institut de Ciència de Materials de Barcelona, ICMAB-CSIC, Bellaterra, Spain

Microstructure, Residual Stress and Interfacial Fracture Toughness in Suspension Plasma Sprayed Thermal Barrier Coating

Shijie Zhu¹, Yuki Okuyama¹, Youichirou Habu², Tatsuo Suidzu²

1: Fukuoka Institute of Technology, Japan; 2: TOCALO Co., Ltd., Japan