Conference Agenda
Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).
Please note that all times are shown in the time zone of the conference. The current conference time is: 21st Nov 2024, 10:30:34pm CET
|
|
|
Session Overview | |
|
Location: Room 338 Forschungszentrum Jülich, Build. 04.7 |
| Date: Wednesday, 05/June/2024 | |
| 9:00am - 5:00pm |
Educational Course Location: Room 338 Thermal Spray Technology: Position among Films and Coatings Technologies, Coatings Characterization and Application, and Technology’s Future09:00 Welcome and Introduction - Lech Pawłowski and Georg Mauer 09:15 Physical Methods of Film and Coatings Deposition - Lech Pawłowski 10:15 Microstructure and Property Control of Thermal Spray Coatings: Particularities, Usefulness, and Methods of Characterization - From Splat to Coatings, - Chang-Jiu Li 11:15 Coffee break 11:30 Thermal Spray: Testing and Characterization Methods - Šárka Houdková 12:30 Lunch break (Seecasino) 13:45 Evolution of Equipment, Technology and Feedstock in Thermal Spraying - Shrikant Joshi 14:45 Experimental Demonstration of Film and Coating Technologies as well as Diagnostic Methods - Georg Mauer and colleagues |
| 4:00pm | ETSA General Assembly Location: Room 338 |
| Date: Thursday, 06/June/2024 | |
| 10:45am - 12:15pm |
Solution and suspension spraying 1 Location: Room 338 Chair: Nicholas Curry Charting unexploited territories with axial-feed plasma spraying University West, Sweden 11:15am - 11:35am Erosion Performance and CMAS Degradation of Non-Flammable Suspension Plasma Sprayed YSZ Coatings 1: university of nottingham, United Kingdom; 2: university of nottingham, United Kingdom; 3: Rolls-Royce plc., Derby, United Kingdom 11:35am - 11:55am Advanced synchrotron micro-X-ray diffraction and X-ray fluorescence for localized phase and elemental analysis in suspension plasma sprayed environmental barrier coatings 1: University of Turku, Finland; 2: VTT Technical Research Centre of Finland: Espoo, Finland; 3: Paul Scherrer Institut: Villigen, Swizerland; 4: University of Nottingham, Nottingham, NG7 2RD, United Kingdom 11:55am - 12:15pm Influence of the particle size on photocatalytic activity of the TiO2 coatings manufactured by suspension plasma spraying Wrocław University of Science and Technology, Poland |
| 2:00pm - 3:30pm |
Solution and suspension spraying 2 Location: Room 338 Chair: Shrikant Joshi Suspension Spraying of Calcium Phosphate Coatings with Antibacterial Properties University of Stutttgart, Germany 2:30pm - 2:50pm Thermal Cycling Performance of Suspension Plasma Sprayed TBCs with Radial Suspension Injection 1: Forschungszentrum Jülich GmbH, Germany; 2: Jülich Aachen Research Alliance, JARA-Energy, Germany; 3: Institut für Werkstoffe, Ruhr-Universität Bochum, Germany 2:50pm - 3:10pm Parameters influencing the photocatalytic activity of suspension-sprayed coatings in the binary ZnO-TiO2 system 1: Fraunhofer Institute for Ceramic Technologies and Systems IKTS Dresden, Germany; 2: Fraunhofer Institute for Material and Beam Technology IWS Dresden, Germany; 3: Institute of Materials Science, Technische Universität Dresden, Germany 3:10pm - 3:30pm Thermal cycling tests on APS and SPS TBC systems on additively manufactured samples with cooling holes 1: Forschungszentrum Jülich GmbH, Germany; 2: Materials Engineering, Rolls-Royce Deutschland, Blankenfelde-Mahlow, Germany; 3: RWTH Aachen, Aachen, Germany; 4: Institut für Werkstoffe, Ruhr-Universität Bochum, Bochum, Germany |
| 4:00pm - 5:50pm |
TBCs / EBCs 1 Location: Room 338 Chair: Thomas Lampke Spray parameters development and CMAS-Induced Degradation of Non-Flammable Suspension Plasma Sprayed (SPS) YSZ Coatings University of Nottingham, United Kingdom 4:30pm - 4:50pm Suspension plasma sprayed ytterbium disilicate coating: Phase stability and microstructural evolution in extreme environments 1: University of Nottingham, United Kingdom; 2: Imperial College London, United Kingdom 4:50pm - 5:10pm From Porous To Columnar – Axial Plasma Spraying of Thermal Barrier Coatings Northwest Mettech Corporation, Canada 5:10pm - 5:30pm Tailoring the bond coat topography by laser microtexturing for various processes of TBC top coat deposition 1: Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Wrocław, Poland; 2: Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Rzeszow, Poland; 3: Institute of Plasma Physics of the Czech Academy of Sciences, Prague, Czech Republic 5:30pm - 5:50pm Assessment of Complex Load Conditions in Burner Rig Environment by Hybrid Image Analysis Forschungszentrum Jülich, Germany |
| Date: Friday, 07/June/2024 | |
| 9:00am - 10:30am |
TBCs / EBCs 2 Location: Room 338 Chair: Nagamani Jaya Balila Progress Update on EBC Research at IEK-1 Forschungszentrum Jülich, Germany 9:30am - 9:50am Influence of advanced microstructural parameters on thermal shock resistance of DVC Y-PSZ/CoNiCrAlY TBC systems deposited on different superalloy substrates 1: Department of Chemical Engineering, Materials, Environment, Sapienza University of Rome, INSTM Reference Laboratory for Engineering of Surface Treatments, Via Eudossiana 18, 00184 Rome, Italy; 2: Nuovo Pignone Tecnologie Srl, Baker Hughes, Via Felice Matteucci 2, 50127 Florence, Italy; 9:50am - 10:10am New developments in the field of thermal barrier coatings Forschungszentrum Jülich, Germany 10:10am - 10:30am The role of process to apply bond-coat on TBC performance PARTO, Iran, Islamic Republic of |
| 11:00am - 12:40pm |
Functional coatings and biomaterials Location: Room 338 Chair: Sergi Dosta Development of thermally sprayed anti-microbial wear protection layers Technische Universitat Dortmund, Germany 11:30am - 12:00pm Multifunctional thermally sprayed coatings for outdoor applications Tampere University, Faculty of Engineering and Natural Sciences, Materials Science and Environmental Engineering, Tampere, Finland 12:00pm - 12:20pm The development of spinel-type high-entropy oxides coatings with oxygen vacancies via solution precursor plasma spraying techniques in multifunctional applications 1: IFKB, University of Stuttgart, Germany; 2: School of Mechanical and Electrical Engineering, Soochow University, China; 3: College of Mechanical Engineering, Yangzhou University, China 12:20pm - 12:40pm The Impact of Atmospheric Plasma Spraying Conditions on Radiopaque Bioactive Glass Coatings for Implant Applications 1: IRCER CNRS UMR7315, University of Limoges, France; 2: FunGlass institute, Alexander Dubček University of Trenčín, Slovakia |
Contact and Legal Notice · Contact Address:  Privacy Statement · Conference: 11 RIPT 2024 |
Conference Software: ConfTool Pro 2.6.151 © 2001–2024 by Dr. H. Weinreich, Hamburg, Germany |