Breakthrough for deposition and properties of fully dense Ni-based alloy coating by APS enabled by full oxidation protection of boron

Chang-Jiu Li, Xin-Yuan Dong, Jiu-Jing Song, Yong-Sheng Zhu, Xiao-Tao Luo

Xi'an Jiaotong University, China, People's Republic of

Investigations on a cascaded DC single cathode single anode plasma generator

Stephan Zimmermann¹, Jochen Schein¹, Kirsten Bozin², Hendrik Heinemann²

1: UniBw München (LPT), Germany; 2: RWTH Aachen University (IOT), Germany

Experimental Characterization of the Operation of Modular Cascade Plasma Torches

Myriam Sleiman¹, Geoffrey Darut¹, Marie-Pierre Planche¹, Ralph Seulin¹, Jean-Jacques Gonzalez², Pierre Freton², Francis Sambou², Armando Salito³, Manfred Roesli³

1: UTBM, CNRS, ICB, F-90010 Belfort cedex, France; 2: LAPLACE, UMR 5213 CNTS-INP-UPS, université de Toulouse, France; 3: Gulhfi Consulting AG Switzerland, Schweiz, Switzerland

Visualization and optimization of feedstock injection during plasma spraying using shadowgraphy and particle detection algorithms

Tomasz Kielczawa, Karolina Wiatrzyk, Jakub Piwowar, Marcin Korzeniowski, Adam Sajbura, Pawel Sokolowski

Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Lukasiewicza 5, 50-371 Wroclaw, Poland

Modelling of suspension plasma spraying - State of the art and gaps for process digitization

Anis Chergui, Anissa Djema, Jyothikrishna Perambadur, Christophe Chazelas, Simon Goutier, Alan Kéromnès, Gilles Mariaux, Vincent Rat, Armelle Vardelle

University of Limoges, Institute of Research for Ceramics, France

Analytical model of the ceramic insulation layer of TBC systems based on qualitative and quantitative descriptions of microstructure

Grzegorz Jan Moskal, Stanisław Roskosz, Anna Jasik, Grzegorz Kokot

Silesian University of Technology, Poland

Simulation-supported process development for the deposition of HVAF-sprayed NiCoCrAlY coatings

Kirsten Bobzin, Hendrik Heinemann, Kevin Jasutyn

Surface Engineering Institute (IOT) RWTH Aachen University, Germany

Nozzle geometry optimization for cold spay applications by using 3D CFD calculations

Julio Gutierrez, Thomas Klassen, Frank Gärtner, Alexander List

Helmut-Schmidt-Universität, Germany

Novel metallic coatings obtained by thermal spray tecnologies

Sergi Dosta¹, Genís Clavé¹, Camila Barreneche¹, Anna Martin Vilardell²

1: Universitat de Barcelona - Dept. of Materials Science and Physical Chemistry, Spain; 2: Fraunhofer Institut für Werkstoff- und Strahltechnik IWS, Germany

Stabilization of the α-phase in atmospheric plasma sprayed (Al,Cr,Ti)2O3 solid solution coatings and its effect on the electrical properties

Maximilian Grimm¹, Lutz-Michael Berger², Susan Conze², Thomas Lindner¹, Thomas Lampke¹

1: Chemnitz University of Technology, Materials and Surface Engineering Group, Germany; 2: Fraunhofer Institute for Ceramic Technologies and Systems, Germany

APS, F-HVOF and HVSFS sprayed Ni20Cr Resistant Heater Coatings

Marvin Sauter¹, Christian Semmler¹, Luca Bortolotti², Giulia Poppi², Giovanni Bolelli², Luca Lusvarghi², Andreas Killinger¹

1: Institut für Fertigungstechnologie keramischer Bauteile, Universität Stuttgart; 2: Dipartimento di Ingegneria ”Enzo Ferrari”, Università di Modena e Reggio Emilia

Protective coating against erosion by thermal spraying on asphalt

Yamina Mebdoua Lahmar, Hadj Lahmar, Nadjet Bouhelal, Nacer Dilmi

Center for Development of Advanced Technologies, Algeria

Progress Update on EBC Research at IEK-1

Emine Bakan, Robert Vaßen

Forschungszentrum Jülich, Germany

Influence of advanced microstructural parameters on thermal shock resistance of DVC Y-PSZ/CoNiCrAlY TBC systems deposited on different superalloy substrates

Giulia Pedrizzetti¹, Rita Bottacchiari¹, Lidia Baiamonte¹, Erica Scrinzi², Elvira Giubbolini², Francesco Marra¹, Giovanni Pulci¹

1: Department of Chemical Engineering, Materials, Environment, Sapienza University of Rome, INSTM Reference Laboratory for Engineering of Surface Treatments, Via Eudossiana 18, 00184 Rome, Italy; 2: Nuovo Pignone Tecnologie Srl, Baker Hughes, Via Felice Matteucci 2, 50127 Florence, Italy;

New developments in the field of thermal barrier coatings

Robert Vaßen, Jens Igel, Jana Joeris, Martin Rüssmann

Forschungszentrum Jülich, Germany

The role of process to apply bond-coat on TBC performance

Mahdi Bozorg Nezhad Nobijari, Sadegh Mastali

PARTO, Iran, Islamic Republic of

Thermal Spray Coatings on Additive Manufactured Components: Literature and Experimental Findings

Maria Francesca Bonilauri¹, Luca Lusvarghi¹, Riccardo Franci², Mario Franchi², Francesco Marra³, Laura Paglia³, Matteo Perini⁴, Sasan Amirabdollahian⁴, Alessandro Morri⁵, Giovanni Bolelli¹

1: Dipartimento di Ingegneria “Enzo Ferrari”, Università di Modena e Reggio Emilia, Italy; 2: Il Sentiero International Campus S.r.l., Via Friuli 11, 36015 Schio, Italy; 3: Dipartimento di Ingegneria Chimica Materiali Ambiente, Universita` di Roma - 1 “La Sapienza”, Italy; 4: ProM Facility - Trentino Sviluppo, Via Fortunato Zeni 8, 38068 (TN), Italy; 5: Dipartimento di Ingegneria Industriale, Università di Bologna, Italy

Fabrication and performance of all-solid-state Li-ion battery components derived by powder and suspension plasma spraying

Vasanth Gopal, Stefan Björklund, Shrikant Joshi

Department of Engineering Science, University West, SE-461 86 Trollhättan, Sweden

Investigation into the Formation and Characteristics of fine CoNiCrAlY Splats on Stainless Steel Tubes Using Inner Diameter HVOF Spraying

Wolfgang Tillmann, Jonas Frederik Zajaczkowski, Ingor Baumann, Volkan Solak

Institute of Materials Engineering, TU Dortmund University, Germany

Development of plasma parameters for the manufacture of MCrAlY-bond coats by low-pressure plasma spraying using a cascading torch

Georg Mauer

Forschungszentrum Jülich GmbH, Germany

Greybox modelling for the prediction of efficiency in thermal spray processes

Hendrik Heinemann, Kirsten Bobzin, Ali Dokhanchi

IOT RWTH Aachen, Germany

Developing High-Entropy Alloy (HEA)-based coatings by combined experiments and Integrated Computational Materials Engineering (ICME)

Giovanni Bolelli¹, Luca Bortolotti¹, Lorenzo Ferrari¹, Stefania Morelli¹, Luca Lusvarghi¹, Alvise Bianchin², Enrico Forlin², Sergi Dosta³, Klaas Rozema⁴, Giulia Gigante⁵, Edoardo Rossi⁵, Anssi Laukkanen⁶, Tomi Suhonen⁶, Song Lu⁶, Markus Apel⁷, Thomas Bähr⁷

1: Dipartimento di Ingegneria "Enzo Ferrari", Università di Modena e Reggio Emilia, Italy; 2: MBN Nanomaterialia SpA, Italy; 3: Departament de Ciència dels Materials i Química Física, Universitat de Barcelona, Spain; 4: Titomic Europe b.v., The Netherlands; 5: Dipartimento di Ingegneria civile, informatica e delle tecnologie aeronautiche, Università di Roma - 3, Italy; 6: VTT Technical Research Center of Finland; 7: Access e.V., Germany

Cold Spray Track Modeling and its Applications

Hongjian Wu¹, Marcel Lewke², Alexander List¹, Frank Gärtner¹, Thomas Klassen¹

1: Institute of Materials Technology, Helmut Schmidt University/University of the Federal Armed Forces Hamburg, 22043 Hamburg, Germany.; 2: Institute of Automation Technology, Helmut Schmidt University/University of the Federal Armed Forces Hamburg, 22043 Hamburg, Germany.

Results of DFT simulations as a source of materials data for analytical prediction of thermal and mechanical properties of TBC systems

Grzegorz Jan Moskal

Silesian University of Technology, Poland

Alternative fracture test methodologies applicable for thermal spray coatings

Nagamani Jaya Balila

Indian Institute of Technology Bombay, India

Selected properties of thermally sprayed metallic glass coatings

Aleksandra Malachowska¹, Pawel Sokolowski¹, Adam Sajbura¹, Sergi Dosta²

1: Wroclaw University of Science and Technology, Poland; 2: University of Barcelona, Spain

Frequency domain thermoreflectance technique for characterisation of coatings

Hans-W. Marx¹, Vincent Linseis¹, Sebastian Feulner¹, Juan Sebastian Reparaz²

1: LINSEIS Messgeräte GmbH, Selb, Germany; 2: Institut de Ciència de Materials de Barcelona, ICMAB-CSIC, Bellaterra, Spain

Microstructure, Residual Stress and Interfacial Fracture Toughness in Suspension Plasma Sprayed Thermal Barrier Coating

Shijie Zhu¹, Yuki Okuyama¹, Youichirou Habu², Tatsuo Suidzu²

1: Fukuoka Institute of Technology, Japan; 2: TOCALO Co., Ltd., Japan

Development of thermally sprayed anti-microbial wear protection layers

W. Tillmann, J. F. Zajaczkowski, I. Baumann

Technische Universitat Dortmund, Germany

Multifunctional thermally sprayed coatings for outdoor applications

Heli Koivuluoto, Betul Aktas, Reza Jafari, Niklas Kandelin, Ruqaya Khammas

Tampere University, Faculty of Engineering and Natural Sciences, Materials Science and Environmental Engineering, Tampere, Finland

The development of spinel-type high-entropy oxides coatings with oxygen vacancies via solution precursor plasma spraying techniques in multifunctional applications

Lei Xie¹, Chengdong Zhao¹, Zexin Yu¹, Botong Wang², Andreas Killinger¹, Chao Zhang³

1: IFKB, University of Stuttgart, Germany; 2: School of Mechanical and Electrical Engineering, Soochow University, China; 3: College of Mechanical Engineering, Yangzhou University, China

The Impact of Atmospheric Plasma Spraying Conditions on Radiopaque Bioactive Glass Coatings for Implant Applications

Laurène Youssef¹, Erwan Bussy¹, German Andres Clavijo Mejia², Martin Michálek², Amandine Magnaudeix¹, Alain Denoirjean¹

1: IRCER CNRS UMR7315, University of Limoges, France; 2: FunGlass institute, Alexander Dubček University of Trenčín, Slovakia